“英语牛人团”欢迎为你
1.接收板焊盘脱铜

翻译：
The receiving board pad copper removal
2.接收板晶振引脚与旁边地脚短路,短路导致无法接收
翻译：Crystal oscillator pins and the next receiving plate anchor short circuit, short circuit cause cannot receive
3.R12使用20M电阻
翻译：
R12 uses the 20M resistor
4.将烙铁温度调到280~320℃,焊锡不超过3秒!
翻译：
The iron temperature below 280~320 ℃, solder is not more than 3 seconds!
5.加强对员工的培训及作业指导
翻译：
To strengthen the training and operational guidance to staff
6.将R12 20M电阻更换为1M电阻
翻译：
Replace the R12 20M for 1M resistance resistance

如果对您有帮助,记得采纳并赞同哦,O(∩_∩)O谢谢 “英语牛人团”欢迎为你
1.接收板焊盘脱铜

翻译：
The receiving board pad copper removal
2.接收板晶振引脚与旁边地脚短路,短路导致无法接收
翻译：Crystal oscillator pins and the next receiving plate anchor short circuit, short circuit cause cannot receive
3.R12使用20M电阻
翻译：
R12 uses the 20M resistor
4.将烙铁温度调到280~320℃,焊锡不超过3秒!
翻译：
The iron temperature below 280~320 ℃, solder is not more than 3 seconds!
5.加强对员工的培训及作业指导
翻译：
To strengthen the training and operational guidance to staff
6.将R12 20M电阻更换为1M电阻
翻译：
Replace the R12 20M for 1M resistance resistance

如果对您有帮助,记得采纳并赞同哦,O(∩_∩)O谢谢