英语翻译焊丝的安装cc安装配件 送丝轮⑨拉出焊丝,通过矫正轮(200、350KR 焊丝导向槽)插入cc接头中.⑤松动调节螺钉,使之脱离线轴固定架⑥将焊丝装入送丝盘上(线轴朝顺时针方向转动)⑦把紧固螺钉拧好⑧从线轴边缘拆掉焊丝松脱的固定装置(注意焊丝弹起松脱)⑩调整加压螺母,袖丝径大小加压
2019-06-19
英语翻译
焊丝的安装
cc安装配件 送丝轮
⑨拉出焊丝,通过矫正轮(200、
350KR 焊丝导向槽)插入cc接头中.
⑤松动调节螺钉,使之脱离线轴固定架
⑥将焊丝装入送丝盘上(线轴朝顺时针
方向转动)
⑦把紧固螺钉拧好
⑧从线轴边缘拆掉焊丝松脱的固定装置
(注意焊丝弹起松脱)
⑩调整加压螺母,袖丝径大小加压
优质解答
Installation Wire
Cc installation accessories round wire feeder
⑨ pull wire through corrective round (200,
350KR wire guide groove) cc inserted in the joints.
⑤ screw loosening regulation,from the tops of the external fixator
⑥ to wire into the wire feeding disk (spindle clockwise North Korea
The direction of rotation)
⑦ to wring good fastening screws
⑧ removed from the wound edge of the loose wire fixtures
(Note that flew loose wire)
⑩ adjust compression nut,silk sleeve diameter pressurized
Installation Wire
Cc installation accessories round wire feeder
⑨ pull wire through corrective round (200,
350KR wire guide groove) cc inserted in the joints.
⑤ screw loosening regulation,from the tops of the external fixator
⑥ to wire into the wire feeding disk (spindle clockwise North Korea
The direction of rotation)
⑦ to wring good fastening screws
⑧ removed from the wound edge of the loose wire fixtures
(Note that flew loose wire)
⑩ adjust compression nut,silk sleeve diameter pressurized